Parseh Kaveh Steel Rolling Mill
Manufacturer of angles and other steel sections
Version:01.00
The 40×40×4 mm steel angle is an equal-leg angle with two 40 mm legs and a thickness of 4 mm, supplied in 6-meter lengths. The approximate weight of each piece is about 13.5 kg and may vary slightly due to permitted manufacturing tolerances.
This product is suitable for projects that require a 40×40 mm steel angle with greater thickness and weight than the 3 mm and 2.8 mm versions. When selecting the product, factors such as dimensions, weight, connection type, loading conditions, technical drawings, and project execution requirements should also be considered.
The price of the 40×40×4 mm steel angle varies depending on current steel market rates, order quantity, stock availability, delivery location, and market conditions. For the latest price, stock status, and order placement, please contact the sales department of Navard Foolad Parseh Kaveh.
The 40×40×4 mm steel angle is an equal-leg angle with two 40 mm legs and a thickness of 4 mm, supplied in 6-meter lengths. The approximate weight of each piece is about 13.5 kg and may vary slightly due to permitted manufacturing tolerances.
The combination of 40×40 mm leg dimensions and a 4 mm thickness gives this product a larger cross-sectional area and greater weight than thinner versions of the same size. When selecting this product, factors such as dimensions, weight, connection type, loading conditions, technical drawings, and project execution requirements should also be considered.
To view other available sizes and thicknesses, you can visit the
steel angle products
page.
The approximate weight of each 6-meter 40×40×4 mm steel angle is about 13.5 kg. The weight of each piece is an important factor when estimating order quantity, transportation costs, and the final shipment weight.
Increasing the thickness from 3 mm to 4 mm increases the cross-sectional area and, consequently, the weight of each piece. Therefore, the 4 mm version is heavier than the 3 mm version. When choosing between the two, factors such as loading conditions, connection type, project technical requirements, and final purchase cost should be considered.
For a more detailed comparison, you can also review the specifications of the
40×40×3 mm steel angle.
The approximate weight of each 6-meter piece of the 3 mm version is about 10.5 kg. Comparing these two products can help you select the appropriate thickness and estimate the total order weight more accurately.
The actual weight of steel products may vary slightly from the nominal or calculated value due to permitted manufacturing tolerances. For bulk orders, the final measured shipment weight provides a more accurate basis for quantity and cost calculations.
The 40×40×4 mm steel angle is classified as an equal-leg angle based on its nominal dimensions. This product has two 40 mm legs and a thickness of 4 mm, and its dimensional specifications should be checked against the technical requirements and standards specified for the project.
For the dimensions and tolerances of this type of section, reference can be made to the national standard ISIRI 13968-1 as well as
EN 10056-1.
The final product selection should be based on technical drawings, loading conditions, and the execution requirements of each project.
A steel angle with 40×40 mm leg dimensions and a thickness of 4 mm can be used in the fabrication of frames, bases, supports, brackets, metal frames, chassis, and other auxiliary steel components. Compared with the 3 mm and 2.8 mm versions, this model provides a larger cross-sectional area and greater weight.
For applications requiring greater thickness or higher section capacity, this model can be considered alongside other 40×40 mm thickness options. However, its suitability for a specific application should ultimately be determined based on engineering calculations and the technical design of the project.
The price of the 40×40×4 mm steel angle is not fixed and may vary depending on factors such as current steel market rates, the weight of each piece, order quantity, stock availability, transportation costs, and delivery location. Each 6-meter piece weighs approximately 13.5 kg, which also affects the final order value.
Key factors influencing the price include steel market conditions, raw material costs, purchase volume, loading conditions, and the distance to the delivery location. For bulk orders, changes in total shipment weight and transportation costs can have a significant impact on the final purchase price.
To check the latest rates, you can visit the
daily steel angle price
page. Before placing an order, it is recommended to confirm stock availability and the final product price directly with the sales department.
Before purchasing the 40×40×4 mm steel angle, it is recommended to determine the required number of pieces, the approximate total order weight, intended application, loading conditions, delivery location, and expected delivery time. Each 6-meter piece weighs approximately 13.5 kg, so the approximate total order weight can be estimated in advance once the required quantity is known.
For bulk orders, checking stock availability, loading conditions, transportation costs, and delivery time becomes particularly important. It is also recommended to compare the product dimensions and thickness with the project drawings and technical specifications before finalizing the purchase, especially when choosing between the 4 mm version and lighter thicknesses of the same size.
To follow general market conditions and steel product transactions, you can also refer to information published by the
Iran Mercantile Exchange
as one of the official market sources. However, the final steel angle price should be confirmed at the time of ordering based on stock availability and current sales conditions.
For the latest price, stock availability, shipping arrangements, and order placement, please visit the
price inquiry and order placement
page or contact the sales department of Navard Foolad Parseh Kaveh.
The approximate weight of each 6-meter 40×40×4 mm steel angle is about 13.5 kg. The actual weight may vary slightly due to permitted manufacturing tolerances; therefore, for bulk orders, the final shipment weight provides a more accurate basis for calculations.
This product is supplied in 6-meter lengths. If specific cutting or delivery requirements apply, it is advisable to coordinate with the sales department before placing an order.
The main difference lies in the thickness and weight of each piece. The 40×40×4 angle bar has greater thickness and weight; a standard 6-meter length weighs approximately 13.5 kg, whereas the 3 mm version weighs about 10.5 kg.
The price of this product depends on factors such as the current steel rate, product weight, order quantity, inventory levels, shipping costs, and delivery location. Therefore, the final price must be verified at the time of placing the order.
This product can be used in the fabrication of frames, supports, holders, brackets, metal casings, chassis, and other metal components. The final selection should be based on the project's technical design and loading conditions.
Yes. This product is an equal-leg angle, and both of its legs have a nominal width of 40 mm.
No. The figure of 13.5 kg represents the approximate weight of each 6-meter length; the actual weight may vary slightly due to permissible manufacturing tolerances.
Before purchasing, it is advisable to specify the number of pieces, the approximate total weight of the order, the intended application, loading conditions, delivery location, receipt time, and shipping costs, and to verify that the product dimensions and thickness align with the project's technical drawings.
Yes. For bulk orders, it is best to coordinate with the sales department regarding stock availability, loading conditions, total order weight, shipping costs, and delivery time before finalizing the order.
To obtain current pricing, check availability, and place an order, you can contact the sales department of Parseh Kaveh Steel Rolling via the "Contact Us" or "Price Inquiry" page.
