40×40×3 mm Equal Steel Angle

40×40×3 mm Steel Angle; Technical Specifications, Weight and Daily Price

The 40×40×3 mm steel angle is an equal-leg angle with two 40 mm legs and a thickness of 3 mm, supplied in 6-meter lengths. The approximate weight of each piece is about 10.5 kg and may vary slightly due to manufacturing tolerances.

This product is suitable for projects requiring a 40×40 mm steel angle with a 3 mm thickness. When selecting the product, factors such as dimensions, weight, connection type, loading conditions, technical drawings, and project execution requirements should also be considered.

• Size: 40×40 mm
• Thickness: 3 mm
• Length: 6 m
• Approximate weight per piece: 10.5 kg
• Type: Equal-leg steel angle

The price of the 40×40×3 mm steel angle varies according to current steel prices, order quantity, stock availability, and delivery conditions. For the latest price, stock status, and order placement, please contact the sales department of Navard Foolad Parseh Kaveh.

Technical Specifications of 40×40×3 mm Steel Angle

The 40×40×3 mm steel angle is an equal-leg angle with two 40 mm legs and a thickness of 3 mm, supplied in 6-meter lengths. The approximate weight of each piece is about 10.5 kg, while the actual weight may vary slightly due to permitted manufacturing tolerances.

The combination of 40×40 mm leg dimensions and a 3 mm thickness makes this product a suitable option for projects requiring a relatively lightweight section with greater thickness than the 2.5 mm and 2.8 mm versions. The final selection should be based on the intended application, loading conditions, connection method, and the technical requirements of the project.

• Leg dimensions: 40×40 mm
• Thickness: 3 mm
• Length: 6 m
• Approximate weight per piece: 10.5 kg
• Section type: Equal-leg steel angle

To view other available sizes and thicknesses, you can visit the
steel angle products
page.

Weight of 40×40×3 mm Steel Angle and Its Difference from 2.8 mm Thickness

The approximate weight of each 6-meter 40×40×3 mm steel angle is about 10.5 kg. The weight per piece is an important factor when estimating order quantity, transportation costs, and the final shipment weight.

Increasing the thickness from 2.8 mm to 3 mm increases the cross-sectional area and, consequently, the weight of each piece. Therefore, the 3 mm version is heavier than the 2.8 mm version. When choosing between the two, the technical requirements of the project, loading conditions, connection type, and final purchase cost should all be considered.

For a more detailed comparison, you can also review the specifications of the
40×40×2.8 mm steel angle.
This comparison can help you better evaluate the differences in weight, thickness, and suitable application conditions between the two models.

The actual weight of steel products may vary slightly from the nominal or calculated value due to permitted manufacturing tolerances. Therefore, for bulk orders, the final measured shipment weight provides a more accurate basis for calculations.

Standards, Features and Applications of 40×40×3 mm Steel Angle

The 40×40×3 mm steel angle is classified as an equal-leg angle based on its nominal dimensions. When evaluating this type of section, the national standard ISIRI 13968-1 and relevant international references concerning the dimensions and tolerances of steel angles may be considered.

The
EN 10056-1
standard also covers the nominal dimensions of hot-rolled equal and unequal leg steel angles. Final compliance with project requirements should be assessed according to the technical drawings, project documentation, and the specified standard.

A steel angle with 40×40 mm leg dimensions and a thickness of 3 mm can be used in the fabrication of frames, bases, supports, brackets, light-duty chassis, metal frames, and other auxiliary steel components. The final application should be selected according to loading conditions, connection type, and the engineering design of the project.

Compared with thinner versions, the 3 mm thickness provides a larger cross-sectional area and greater weight, making it suitable for consideration in projects that require a 40×40 mm section with increased thickness.

Price, Purchase and Order Placement for 40×40×3 mm Steel Angle

The price of the 40×40×3 mm steel angle is not fixed and may vary depending on factors such as current steel market rates, product weight, order quantity, stock availability, transportation costs, and delivery location. Each 6-meter piece weighs approximately 10.5 kg, so the number of pieces and the final shipment weight also affect the total purchase cost.

To check the latest product rates, you can visit the
daily steel angle price
page. You can also follow general market conditions and steel product transactions using information published by the
Iran Mercantile Exchange
as one of the official market sources.

Before placing an order, it is recommended to determine the required number of pieces, approximate total shipment weight, intended application, loading conditions, delivery location, and expected delivery time. For bulk orders, checking stock availability, loading conditions, and transportation costs before finalizing the purchase is particularly important.

If you are still comparing different thicknesses in this size, you can also review the specifications of the
40×40×2.8 mm steel angle
to better evaluate the differences in thickness, weight, and selection conditions.

For stock availability, final pricing, and purchase arrangements, please visit the
price inquiry and order placement
page or contact the sales department of Navard Foolad Parseh Kaveh.